/* Imported from Wayback Machine
Original URL : https://www.retrobrewcomputers.org/n8vem-gg-archive/html-2015/Jun/msg00034.html Snapshot date: 2024-02-15 Generator : wayback-archiver
*/
Date Prev]Date Next]Thread Prev]Thread Next]Date Index]Thread Index]
Re: N8-4314 Issues
- Subject: Re: N8-4314 Issues
- From: RichLeary «Richar…@gmail.com»
- Date: Sat, 13 Jun 2015 08:39:14 -0700 (PDT)
Great News - my second attempt at building a N8-4314 appears to be a good one. System booted right up using ROMWBW 2.7.1 and is totally stable. SD card and LED are working as expected. RTC is working correctly.
I need to test floppy interface and just for fun exercise some of the other I/O including the video, PS2 keyboard, and audio. I need to do some research on that score. As is, the 9918 appears to be responding to some ROMWBW initialization as the screen shows a full screen of the same symbol after a reset. The usual lights on a connected keyboard are dark - do not know if that means anything.
A note on as-built configuration. I used all 74LS logic except for the 574's that are 74ALS574's just because I did not immediately find 74LS574's at DigiKey, my preferred source. CPU oscillator is 18.432 MHz. Since I have no plans to use the ECB interface I have not set the K1 configuration - there is no jumper on K1. K21 & K22 are set to 1-2 jumpered but the two 4700 ohm resistors are still in place - without anything connected to the ECB bus this should also be a “don't care”.
Rich Leary
- Follow-Ups:
-
- From: Wayne Warthen <wwar…@gmail.com>
-
- Prev by Date: Re: [N8VEM: 19693] n8vem homepage requiring login?
- Next by Date: RE: [N8VEM: 19694] N8 Questions
- Previous by thread: Re: [N8VEM: 19701] Re: Dual IDE/floppy v.2 going into production
- Next by thread: Re: N8-4314 Issues
- Index(es):