This is an old revision of the document!
Table of Contents
/* Imported from Wayback Machine
Original URL : https://retrobrewcomputers.org/doku.php?id=builderpages:plasmo:zuno:zuno_proj:rgb_led_shield Snapshot date: 2024-11-09 Generator : wayback-archiver
*/
RGB LED Shield for Zuno
Introduction
Shield for RGB panel is a 2”x4“ thin pc board with connectors that plugs into the I2C connector of Zuno. It hosts a 5×10 array of RGB LEDs
Design Files
Gerber photoplots
