builderpages:plasmo:quadser:rev1
Table of Contents
/* Imported from Wayback Machine
Original URL : https://www.retrobrewcomputers.org/doku.php?id=builderpages:plasmo:quadser:rev1 Snapshot date: 2024-01-16 Generator : wayback-archiver
*/
Table of Contents
QuadSer Rev1, Module with 4 Serial Ports for RC2014
Introduction
QuadSer is a module based on OX16C954, Quad UART with 128-byte FIFOs.
This is link to rev0 of QuadSer.
This is link to rev1 Quadser modified for Z280RC.
Features
OX16C954 with Quad UART each with 128-byte FIFOs
I/O address is hardwired to 0xC0-0xDF
For RC2014 bus
Design Information
Gerber Photoplots
Software
Loopback diagnostic software
Documentation
OX16C954 Data sheet
Software examples for OX16C95x
builderpages/plasmo/quadser/rev1.txt · Last modified: by 127.0.0.1