Table of Contents
/* Imported from Wayback Machine
Original URL : https://retrobrewcomputers.org/doku.php?id=builderpages:plasmo:kuno Snapshot date: 2025-10-15 Generator : wayback-archiver
*/
Table of Contents
Kuno, P90CE201 for Arduino Mega Enclosure
Introduction
The name “Kuno” is concatenation of “K” of 68000 or 68K and “uno” of Arduino. Kuno is P90MB repackaged for Arduino Mega Enclosure.
Features
P90CE201 at 22MHz
512K PROM
512K RAM
EPM7032S CPLD
44-pin Disk-on-Module interface
I2C connectors
RC2014 I/O expansion bus
CP/M68K ready
Design Files
Software
CP/M68K BIOS
CP/M68K distribution files, plus gkermit, microEmac, and BASIC compiler. Unzip and use gkermit to upload to P90MB. The console baud rate needs to change to 9600 baud for gkermit to work.
Lee Davison's EhBasic for P90CE201
EPROM programming file with monitor, CP/M, and EhBasic
Conway's Game of Life running on P90MB. This requires a 128×64 OLED display plugged into the I2C connector. The scenerio running is “Gosper Gun”.
Documentation
P90CE201 Datasheet