This is an old revision of the document!
/* Imported from Wayback Machine
Original URL : https://www.retrobrewcomputers.org/doku.php?id=builderpages:plasmo:crc65:rev0ec Snapshot date: 2022-09-27 Generator : wayback-archiver
*/
Engineering Change for Rev0 CRC65
This engineering change disconnects the 6502's SYNC signal to RC2014 pin 26 and connects CF chip select to RC2014 pin 26 instead.
Picture shows a cut (partly obscured by the jumper wire) right above RC2014 pin 26 and a jumper from CPLD to RC2014 pin 26.
