/* Imported from Wayback Machine
Original URL : https://www.retrobrewcomputers.org/n8vem-gg-archive/html-2013/May/msg00060.html Snapshot date: 2022-11-15 Generator : wayback-archiver
*/
Date Prev]Date Next]Thread Prev]Thread Next]Date Index]Thread Index]
| Nik, Generally speaking, it is not very hard to add new terminal types to the RomWBW application support. Only two escape sequences are required, one to clear the screen, and another to position the cursor. Once those two escapes are coded into the system, all the full screen apps, such as “map” and others will work as expected. If you supply the escape codes needed for the hazeltine support, I will interface with Wayne about adding support for them. Douglas Goodall On May 24, 2013, at 4:01 AM, brizza «nbri…@optusnet.com.au» wrote: <blockquote> Hi, i'm building a custom rom with the current bios ,RomWBW v2.5, but the keyboard is not responding, video is fine. Odd since previous bios' all worked fine with this terminal. The only changes i need to make is the baud rate back to 9600 and floppy drive to FDM120. I have tried all 3 terminal types, ANSI,TTY and WYSE but none have keyboard reponse. Anything else i could try. The BAUD rate needs to stay at 9600 since that is the highest setting for this terminal. Nik – You received this message because you are subscribed to the Google Groups “N8VEM” group. To unsubscribe from this group and stop receiving emails from it, send an email to <n8vem+un…@googlegroups.com>. To post to this group, send email to <n8…@googlegroups.com>. Visit this group at http://groups.google.com/group/n8vem?hl=en. For more options, visit https://groups.google.com/groups/opt_out. </blockquote> —http://www.linkedin.com/in/douglasgoodall |