Table of Contents
/* Imported from Wayback Machine
Original URL : https://www.retrobrewcomputers.org/doku.php?id=builderpages:plasmo:protorc3 Snapshot date: 2025-03-15 Generator : wayback-archiver
*/
Table of Contents
Prototype Board (Rev3) for RC2014
ProtoRC3 (Prototype for RC2014, Rev3) is a 100mm x 76mm perf board with an Altera EPM7064S CPLD prewired to a RC2014 bus. The 5V programmable logic is flexible and has sufficient logic to handle a varieties of designs. ProtoRC3 is designed for through-hole components.
Design Data
ProtoRC3 Designs
CRC65 Prototype
The first CRC65 was prototyped using ProtoRC3. It is a frugal single board computer based on 65C02. This is the homepage for CRC65. Discussion about CRC65 can be found here:
http://forum.6502.org/viewtopic.php?f=10&t=6440
65SPI Prototype
Daryl Rictor's 65SPI is prototyped with ProtoRC3. Discussion about 65SPI can be found here:
http://forum.6502.org/viewtopic.php?f=4&t=1265&start=75 Topics related to prototyping of 65SPI on ProtoRC3 started Jan 18, 2021
VGA6448 Prototype
VGA6448 is a monochrome, 64-column X 48-line VGA video card for CRC65. Discussion about it can be found here:
http://forum.6502.org/viewtopic.php?f=10&t=6502
FRR512K Prototype
Frugal 512K RAM/ROM is a low-cost version of RC2014 512K RAM/ROM module with added I2C and compact flash functions.
