/* Imported from Wayback Machine
Original URL : https://retrobrewcomputers.org/doku.php?id=builderpages:plasmo:protor5:proto65:proto65r01 Snapshot date: 2025-11-17 Generator : wayback-archiver
*/
This is the link to Proto65 Rev0, an earlier version without the disk-on-module.
This is the link to Proto65 Rev0.2, a later version with I2C bus added
Protor5 has a prototype area big enough for a processor, RAM and IDE44 interface. In this evolving project a 6502 CPU along with 128Kx8 RAM and an IDE interface are prototyped on a protor5 board.
Based on protor5
EPM7192SQC160 CPLD
Reset supervisor
CPLD programming header
Reset supervisor
2.1mm X 5.5mm power jack
Oscillator socket for full and 1/2 size can
Serial port interface
Prototype area
6502 CPU testbed
128K 25-ns RAM based on CY7C109-25
IDE44 interface for CF disk
40-pin expansion connector
Bootstrap ROM inside the CPLD
TinyLoad, a 256-byte Intel Hex loader.
CFboot, an utility program to write bootstrap program into the Master Boot Record of a CF or DOM disk. It also copy RAM image from 0xC000-0xEDFF into track 0, sector 0xE0-0xF7 of a disk
EhBASIC, Lee Davison's EhBASIC ported to Proto65