/* Imported from Wayback Machine
   Original URL : https://retrobrewcomputers.org/doku.php?id=builderpages:plasmo:zrcc:zrcc1_1
   Snapshot date: 2023-03-30
   Generator    : wayback-archiver
*/

====== ZRCC, Z80+RAM+CPLD+CF disk, Rev 1.1 ======

===== Introduction =====

ZRCC rev 1.1 is electrically same as rev 1, but without the engineering change to correct the schematic errors. Please refer to [[builderpages:plasmo:zrcc:zrcc1|rev1]] homepage for descriptions of ZRCC and its software. Only the revised design files and pictorial assembly instruction will be included in this page

===== Design Information =====

[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zrcc:zrcc1:zrcc_rev1_1_scm.pdf|Schematic]]

Gerber [[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zrcc:zrcc1:zrcc_rev1.1_gerber_single.zip|photoplots]]

[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zrcc:zrcc1:zrcc1_bom.pdf|Bill of Materials]] ← is same as ZRCC rev 1

[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zrcc:zrcc1:zrcc_cpld_rev1_1_pcb_released.zip|CPLD equations]]

[[builderpages:plasmo:zrcc:zrcc1:mem_map_zrcc1|Memory map]] ← is same as ZRCC rev 1

[[builderpages:plasmo:zrcc:zrcc1:zrcc1_1assembly|Pictorial Assembly Guide]] is slightly different than the rev1 assembly guide because the cuts and jumpers associated with engineering change are no longer needed.

==== Software ====

ZRCC rev1.1 software is same as [[builderpages:plasmo:zrcc:zrcc1|ZRCC rev1]]