/* Imported from Wayback Machine
   Original URL : https://www.retrobrewcomputers.org/doku.php?id=boards:other:ppide
   Snapshot date: 2025-09-07
   Generator    : wayback-archiver
*/

====== PPIDE ======

The PPIDE board is an interface board designed to connect IDE devices such as hard drives and Compact Flash cards to a computer through the parallel expansion connector..

===== Features =====

Compatible with SBC V2, SBC-188 and Zeta computers.

Does not require an ECB backplane to operate.

Software support in ROMWBW and CP/M.

===== Pictures =====

{{[[lib:plugins:ckgedit:fckeditor:userfiles:image:boards:other:ppide:mini_ppide.jpg]]

[[boards:other:ppide:gallery|Gallery]]

===== Current Version =====

The current [[https://n8vem.narkive.com/S6iu5dyr/n8vem-18636-mini-ppide-boards-new-layout-sbc-188-sbcv2|version]] was designed by [[https://thezippsterzone.com/about-me/|Ed Snider]] and incorporate layout changes for mounting within the base board footprint without blocking access to adjacent connectors.

===== Acknowledgements =====

Max Scane developed the original design and pcb board with software support provided by David Giles and Wayne Warthen.

====== Hardware Documentation ======

===== Board =====

[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:other:ppide:ppidegerbers.zip|:boards:other:ppide:ppidegerbers.zip]]

https://oshpark.com/shared_projects/is8CiGZf

===== Schematics =====

[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:other:ppide:ppide-schematic.pdf|:boards:other:ppide:ppide-schematic.pdf]]

===== Parts =====

^Desg^Part                            ^Qty^
|    |74LS14                          |1  |
|    |14-pin DIP narrow socket        |1  |
|    |26-pin header (13×2)            |1  |
|    |0.1uf (100 nF) Ceramic Capacitor|1  |
|    |40-pin right angle header (20×2)|1  |
|    |LED                             |1  |
|    |470R Resistor                   |1  |
|    |4-pin power connector           |1  |
|JP2 |2-pin header                    |1  |
|KP1 |1x 3-pin header                 |1  |

Substitute male IDC headers if remote mounting with flying leads is desired.

\\

====== Resources ======

Legacy archive: [[n8vem-pbwiki-archive:0:35845334:35845372:35846055:index|[[n8vem-pbwiki-archive:0:35845334:35845372:35846055:index.htm]]]]