Retro PCBs Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

/* Imported from Wayback Machine
   Original URL : https://www.retrobrewcomputers.org/doku.php?id=builderpages:plasmo:crc65:rev0ec
   Snapshot date: 2025-09-09
   Generator    : wayback-archiver
*/

====== Engineering Change for Rev0 CRC65 ======

This engineering change disconnects the 6502's SYNC signal to RC2014 pin 26 and connects CF chip select to RC2014 pin 26 instead.

[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?tok=3c5154&media=https%3A%2F%2Fwww.retrobrewcomputers.org%2Flib%2Fplugins%2Fckgedit%2Ffckeditor%2Fuserfiles%2Fimage%2Fbuilderpages%2Fplasmo%2Fcrc65%2Fcrc65_rev0_ec.jpg|{{https://www.retrobrewcomputers.org/lib/exe/fetch.php?w=600&h=393&tok=60c26e&media=https%3A%2F%2Fwww.retrobrewcomputers.org%2Flib%2Fplugins%2Fckgedit%2Ffckeditor%2Fuserfiles%2Fimage%2Fbuilderpages%2Fplasmo%2Fcrc65%2Fcrc65_rev0_ec.jpg?600x393|www.retrobrewcomputers.org_lib_plugins_ckgedit_fckeditor_userfiles_image_builderpages_plasmo_crc65_crc65_rev0_ec.jpg}}]]

Picture shows a cut (partly obscured by the jumper wire) right above RC2014 pin 26 and a jumper from CPLD to RC2014 pin 26.