Differences

This shows you the differences between two versions of the page.

--- builderpages:speed3ple:ecb-ramfloppy [2025/03/15 06:49] – Revision from 2025-03-15
+++ builderpages:speed3ple:ecb-ramfloppy [2026/06/15 13:21] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+/* Imported from Wayback Machine
+   Original URL : https://retrobrewcomputers.org/doku.php?id=builderpages:speed3ple:ecb-ramfloppy
+   Snapshot date: 2025-12-08
+   Generator    : wayback-archiver
+*/
+====== ECB RamFloppy board: ======
+This is the R11 version.
+Built with 8 x AS6C4008-55 and a mix of HC, AHCT and LS logic.
+Lesson learned: If You try to use 2 RamFloppy boards at the same time, pay attention to current draw from the power supply. My first power supply could not keep up; 5volt was down to 4,45volt and there was trouble booting system.
+I used a SMD version of the TLC7705D on a small adapter board. Seems to work.
+Good read/write speeds!
+^Text                       ^Images                                                                                                                                                                             ^
+|ECB-RamFloppy pcb completed|{{[[lib:plugins:ckgedit:fckeditor:userfiles:image:builderpages:speed3ple:images:img_20200327_235424small.jpg]] completed PCB}}|
+|ECB-RamFloppy in use       |                                                                                                                                                                                   |
+\\