Differences

This shows you the differences between two versions of the page.

--- builderpages:plasmo:zzrcc [2025/01/08 15:57] – Revision from 2025-01-08
+++ builderpages:plasmo:zzrcc [2026/06/15 13:19] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 /* Imported from Wayback Machine
-   Original URL : https://www.retrobrewcomputers.org/doku.php?id=builderpages%3Aplasmo%3Azzrcc
+   Original URL : https://retrobrewcomputers.org/doku.php?id=builderpages:plasmo:zzrcc
-   Snapshot date: 2025-01-08
+   Snapshot date: 2025-02-09
    Generator    : wayback-archiver
 */
@@ Line 49: / Line 49: @@
 ===== Design Information =====
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:zzrcc_rev0_scm.pdf|Schematic]]
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:zzrcc_rev0_scm.pdf|Schematic]]
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:zzrcc_gerber_rev0.zip|Gerber photoplots]]
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:zzrcc_gerber_rev0.zip|Gerber photoplots]]
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:zzrcc_i2c_cpld_12-18-20.zip|CPLD]] design
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:zzrcc_i2c_cpld_12-18-20.zip|CPLD]] design
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:zzrcc_rev0pcb_bom.pdf|Bill of Materials]]
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:zzrcc_rev0pcb_bom.pdf|Bill of Materials]]
 ==== Software ====
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:zrserloader_v0_1_12_20_20.zip|ZZRCC Serial Loader]]. A small 256-byte program designed to be serially loaded into ZZRCC when configured to serial bootstrap mode.
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:zrserloader_v0_1_12_20_20.zip|ZZRCC Serial Loader]]. A small 256-byte program designed to be serially loaded into ZZRCC when configured to serial bootstrap mode.
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:zzrmon_v0_5_released.zip|ZZRCC Monitor]]. A simple monitor for ZZRCC
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:zzrmon_v0_5_released.zip|ZZRCC Monitor]]. A simple monitor for ZZRCC
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:cfbootloader_12_20_20.zip|CF Bootloader]]. An utility program that copies bootstrap program to Master Boot Block of a CF disk and ZZRCC Monitor to designated space of CF disk.
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:cfbootloader_12_20_20.zip|CF Bootloader]]. An utility program that copies bootstrap program to Master Boot Block of a CF disk and ZZRCC Monitor to designated space of CF disk.
-/8/21, [[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:updated_cfbootloader_1_8_21.zip|Updated CF Bootloader]] to fix a bug in 12_20_20 release. This is not yet an official release waiting for additional testing
+/8/21, [[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:updated_cfbootloader_1_8_21.zip|Updated CF Bootloader]] to fix a bug in 12_20_20 release. This is not yet an official release waiting for additional testing
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:scmonitor_startrek_zzrcc.zip|SCMonitor+StarTrek]]. This is Steve Cousin's SCMonitor ported to ZZRCC. This is [[https://smallcomputercentral.wordpress.com/|Steve Cousin's homepage]]. As an extra bonus, it includes the StarTrek program in BASIC. To install SCMonitor+StarTrek, send scmonitor_startrek.hex to ZZRCC and type 'c1' to install it in track 0 of CF disk. Once it is installed, type 'b1' to load and run SCMonitor. To run Startrek in BASIC, type 'wbasic', then 'run'. Have fun! [[https://www.youtube.com/watch?v=CbfR3bzuxMc|Youtube video]] of running Startrek in ZZRCC using a TeraTerm macro file. This is the [[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zrcc:zrcc1:startrek_teraterm_macro.zip|TeraTerm macro]] program
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:scmonitor_startrek_zzrcc.zip|SCMonitor+StarTrek]]. This is Steve Cousin's SCMonitor ported to ZZRCC. This is [[https://smallcomputercentral.wordpress.com/|Steve Cousin's homepage]]. As an extra bonus, it includes the StarTrek program in BASIC. To install SCMonitor+StarTrek, send scmonitor_startrek.hex to ZZRCC and type 'c1' to install it in track 0 of CF disk. Once it is installed, type 'b1' to load and run SCMonitor. To run Startrek in BASIC, type 'wbasic', then 'run'. Have fun! [[https://www.youtube.com/watch?v=CbfR3bzuxMc|Youtube video]] of running Startrek in ZZRCC using a TeraTerm macro file. This is the [[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zrcc:zrcc1:startrek_teraterm_macro.zip|TeraTerm macro]] program
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:cpm22_v0_1_12_20_20.zip|CP/M2.2 BIOS/CCP/BDOS]] for ZZRCC. To install it, send cpm22all.hex to ZZRCC and type 'c2' to install it in track 0 of CF disk. Once it is installed, type 'b2' to load and run CP/M2.2
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:cpm22_v0_1_12_20_20.zip|CP/M2.2 BIOS/CCP/BDOS]] for ZZRCC. To install it, send cpm22all.hex to ZZRCC and type 'c2' to install it in track 0 of CF disk. Once it is installed, type 'b2' to load and run CP/M2.2
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zrcc:zrcc1:xmodem.hex|XMODEM.HEX]]. This is the very first program in a new ZZRCC CF disk. Install CP/M2.2 above first, then while in ZZRCC Monitor, send xmodem.hex to ZZRCC; then type 'b2' to enter CP/M2.2; then type 'save 17 xmodem.com' at CP/M prompt. This will save the RAM image into a file called xmodem.com.
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zrcc:zrcc1:xmodem.hex|XMODEM.HEX]]. This is the very first program in a new ZZRCC CF disk. Install CP/M2.2 above first, then while in ZZRCC Monitor, send xmodem.hex to ZZRCC; then type 'b2' to enter CP/M2.2; then type 'save 17 xmodem.com' at CP/M prompt. This will save the RAM image into a file called xmodem.com.
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zrcc:zrcc1:unarj.zip|unarj.com]]. This is file decompression program running in CP/M. Use it to decompress .arj files
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zrcc:zrcc1:unarj.zip|unarj.com]]. This is file decompression program running in CP/M. Use it to decompress .arj files
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zrcc:zrcc1:cpm22dri.zip|cpm22dri]]. This is the CP/M2.2 distribution files from Digital Research. Use unarj.com to decompress it.
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zrcc:zrcc1:cpm22dri.zip|cpm22dri]]. This is the CP/M2.2 distribution files from Digital Research. Use unarj.com to decompress it.
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80mb64:zorkall.zip|Zorkall]] is Zork1, Zork2, and Zork3 compressed with arj. Use unarj.com above to decompress.
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80mb64:zorkall.zip|Zorkall]] is Zork1, Zork2, and Zork3 compressed with arj. Use unarj.com above to decompress.
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80mb64:htc309.zip|HTC309]] is version 3.09 of HiTech C that has been released into publica domain. It is compressed with arj, use unarj.com above to decompress
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80mb64:htc309.zip|HTC309]] is version 3.09 of HiTech C that has been released into publica domain. It is compressed with arj, use unarj.com above to decompress
-Installation macro for ZZRCC CF disk. This [[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:zzrcc_install_all_teraterm_macro.zip|zipped file]] contains all the files that are installed in a released ZZRCC disk. The installation macro runs in TeraTerm and expects all files in directory c:\teraterm\zzrcc Run the macro once the serial loader is loaded and the serial port is changed back to 115200 N81.
+Installation macro for ZZRCC CF disk. This [[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:zzrcc_install_all_teraterm_macro.zip|zipped file]] contains all the files that are installed in a released ZZRCC disk. The installation macro runs in TeraTerm and expects all files in directory c:\teraterm\zzrcc Run the macro once the serial loader is loaded and the serial port is changed back to 115200 N81.
 ===== Manuals and Instructions =====
@@ Line 91: / Line 91: @@
 [[builderpages:plasmo:zzrcc:test_without_cf_disk|Testing ZZRCC without CF disk]]
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z280rc:z280_mpu_noocr_bw_400_.pdf|Z280 Technical manual]]
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z280rc:z280_mpu_noocr_bw_400_.pdf|Z280 Technical manual]]
 ===== ToDo =====
@@ Line 107: / Line 107: @@
 === Interface to 128x64 OLED display ===
-This is ZZRCC driving a 128×64 OLED display over the I2C bus. The clock is free-running rapidly mainly as a demonstration of I2C display interface capability. Load and run the [[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:applications:zzrcc_i2c_fast_free_running_clock.zip|clock demo]] program from 0x1000
+This is ZZRCC driving a 128×64 OLED display over the I2C bus. The clock is free-running rapidly mainly as a demonstration of I2C display interface capability. Load and run the [[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:applications:zzrcc_i2c_fast_free_running_clock.zip|clock demo]] program from 0x1000
 [[https://www.retrobrewcomputers.org/lib/exe/fetch.php?tok=a95864&media=https://www.retrobrewcomputers.org/lib/plugins/ckgedit/fckeditor/userfiles/image/builderpages/plasmo/zzrcc/zzrcc_i2c_annotatated.jpg|{{https://www.retrobrewcomputers.org/lib/plugins/ckgedit/fckeditor/userfiles/image/builderpages/plasmo/zzrcc/zzrcc_i2c_annotatated.jpg?500x304|www.retrobrewcomputers.org_lib_plugins_ckgedit_fckeditor_userfiles_image_builderpages_plasmo_zzrcc_zzrcc_i2c_annotatated.jpg}}]]
-Conway's Game of Life, [[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:applications:zzrcc_i2c_game_of_life.zip|Gosper Glider Gun]], running on ZZRCC. Load and run the program from 0x1000
+Conway's Game of Life, [[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:zzrcc:applications:zzrcc_i2c_game_of_life.zip|Gosper Glider Gun]], running on ZZRCC. Load and run the program from 0x1000
 [[https://www.retrobrewcomputers.org/lib/exe/fetch.php?tok=cadbd4&media=https://www.retrobrewcomputers.org/lib/plugins/ckgedit/fckeditor/userfiles/image/builderpages/plasmo/zzrcc/applications/zzrcc_i2c_gosper_glide_gun.jpg|{{https://www.retrobrewcomputers.org/lib/plugins/ckgedit/fckeditor/userfiles/image/builderpages/plasmo/zzrcc/applications/zzrcc_i2c_gosper_glide_gun.jpg?400x330|www.retrobrewcomputers.org_lib_plugins_ckgedit_fckeditor_userfiles_image_builderpages_plasmo_zzrcc_applications_zzrcc_i2c_gosper_glide_gun.jpg}}]]