Differences

This shows you the differences between two versions of the page.

--- builderpages:plasmo:z80all:z80all_rev1 [2022/08/09 19:57] – Revision from 2022-08-09
+++ builderpages:plasmo:z80all:z80all_rev1 [2026/06/15 13:15] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 /* Imported from Wayback Machine
-   Original URL : https://www.retrobrewcomputers.org/doku.php?id=builderpages:plasmo:z80all:z80all_rev1
+   Original URL : https://retrobrewcomputers.org/doku.php?id=builderpages:plasmo:z80all:z80all_rev1
-   Snapshot date: 2022-08-09
+   Snapshot date: 2025-10-15
    Generator    : wayback-archiver
 */
-====== Z80ALL, A Standalone Z80 Computer, Rev 1 ======
+====== Z80ALL, A Standalone Z80 Computer, Rev 1 and 2 ======
 ===== Introduction =====
 This is link to [[builderpages:plasmo:z80all|earlier version]] of Z80ALL.
+This is link to [[builderpages:plasmo:z80all:z80all_rev1:z80allr1quad|standalone Z80ALL]] with either QuadSer or KIORC serial boards
 Z80ALL is my first attempt to build a standalone CP/M system. It is the combination of two previous designs, ZRCC and VGARC. The goal is an economical Z80 SBC with VGA and PS2 keyboard on a 4“x4” 2-layer pc board.
@@ Line 61: / Line 63: @@
 ===== Design Information =====
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:z80all_rev1_scm.pdf|Schematic]]
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:z80all_rev1_scm.pdf|Schematic]]
-Gerber [[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:z80all_r1_gerber.zip|photoplots]]
+Gerber <del>[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:z80all_r1_gerber.zip|photoplots]]</del> [[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:z80all_r1_gerber.zip|]] 11/17/23, Rev 1 PCB is updated. This is the link to [[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_gerber_rev2.zip|Rev2 PCB]]. It is now a 4-layer PCB, but the design is the same.
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:rev1pcb_working_64column_48line_no_ps2.zip|CPLD design]] ← CPLD design is still evolving. This is an interim working design but without PS2 keyboard interface
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:rev1pcb_working_64column_48line_no_ps2.zip|CPLD design]] ← CPLD design is still evolving. This is an interim working design but without PS2 keyboard interface
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:bom_z80all_rev1.pdf|Bill of Materials]]
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:bom_z80all_rev1.pdf|Bill of Materials]]
 [[builderpages:plasmo:z80all:z80all_rev:mem_io_map|Memory and I/O Map]]
@@ Line 75: / Line 77: @@
 Bootstrap ROM in CPLD, this 64-byte bootstrap can boot from serial or CF disk
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_simple_bootstrap_rev_0_1.zip|Simple ROM bootstrap]], this 32-byte bootstrap always boot from CF disk
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_simple_bootstrap_rev_0_1.zip|Simple ROM bootstrap]], this 32-byte bootstrap always boot from CF disk
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_serial_loader_r0_0.zip|Serial Loader]] resides in compact flash's Master Boot Record
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_serial_loader_r0_0.zip|Serial Loader]] resides in compact flash's Master Boot Record
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:zall_monitor_r0_2.zip|Z80ALL monitor]]
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:zall_monitor_r0_2.zip|Z80ALL monitor]]
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:scmonitor_startrek_z80all.zip|SCMonitor+StarTrek]] This is Steve Cousin's SCMonitor ported to Z80ALL. This is [[https://smallcomputercentral.wordpress.com/|Steve Cousin's homepage]]. As an extra bonus, it includes the StarTrek program in BASIC. To install SCMonitor+StarTrek, send scmonitor_startrek_z80all.hex to Z80ALL and type 'c1' to install it in track 0 of CF disk. Once it is installed, type 'b1' to load and run SCMonitor. To run Startrek in BASIC, type 'wbasic', then 'run'. Have fun!
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:scmonitor_startrek_z80all.zip|SCMonitor+StarTrek]] This is Steve Cousin's SCMonitor ported to Z80ALL. This is [[https://smallcomputercentral.wordpress.com/|Steve Cousin's homepage]]. As an extra bonus, it includes the StarTrek program in BASIC. To install SCMonitor+StarTrek, send scmonitor_startrek_z80all.hex to Z80ALL and type 'c1' to install it in track 0 of CF disk. Once it is installed, type 'b1' to load and run SCMonitor. To run Startrek in BASIC, type 'wbasic', then 'run'. Have fun!
 CP/M 2.2 BIOS/CCP/BDOS
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:z80all_cpm3_loader.zip|CP/M3 Loader]]. This is loader for CP/M3. It expects CPM3.SYS in drive A of the CF disk. To install it, send CPM3LDR.HEX to Z80ALL and type 'c3' to install it in track 0 of CF disk. Once it is installed, type 'b3' to boot CP/M3.
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:z80all_cpm3_loader.zip|CP/M3 Loader]]. This is loader for CP/M3. It expects CPM3.SYS in drive A of the CF disk. To install it, send CPM3LDR.HEX to Z80ALL and type 'c3' to install it in track 0 of CF disk. Once it is installed, type 'b3' to boot CP/M3.
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:z80all_cpm3all_distribution.zip|CPM3ALL]]. This is the CP/M 3 distribution files. Use unarj.com to decompress it.
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:z80all_cpm3all_distribution.zip|CPM3ALL]]. This is the CP/M 3 distribution files. Use unarj.com to decompress it.
-CPM3 [[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:z80all_cpm3_cbios_ldrbios_source.zip|banked BIOS]] source code, assembled with zmac
+CPM3 [[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:z80all_cpm3_cbios_ldrbios_source.zip|banked BIOS]] source code, assembled with zmac
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:z80all_64mb_cpm2_cpm3_scmon_htc_zork.zip|CF image file]] contains CP/M2.2, CP/M3, HiTech C, Zork, SCMonitor. Unzip to z80all_64MB_cpm2_cpm3_scmon_htc_zork.img and use Win32DiskImager to copy the image file to a 64MB or larger CF disk.
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z80all:z80all_rev1:z80all_64mb_cpm2_cpm3_scmon_htc_zork.zip|CF image file]] contains CP/M2.2, CP/M3, HiTech C, Zork, SCMonitor. Unzip to z80all_64MB_cpm2_cpm3_scmon_htc_zork.img and use Win32DiskImager to copy the image file to a 64MB or larger CF disk.
 ===== Demo =====