Differences

This shows you the differences between two versions of the page.

--- builderpages:plasmo:z280rc:new_cfdisk [2022/08/15 21:01] – Revision from 2022-08-15
+++ builderpages:plasmo:z280rc:new_cfdisk [2026/06/15 13:15] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 /* Imported from Wayback Machine
-   Original URL : https://www.retrobrewcomputers.org/doku.php?id=builderpages:plasmo:z280rc:new_cfdisk
+   Original URL : https://retrobrewcomputers.org/doku.php?id=builderpages:plasmo:z280rc:new_cfdisk
-   Snapshot date: 2022-08-15
+   Snapshot date: 2025-02-14
    Generator    : wayback-archiver
 */
@@ Line 14: / Line 14: @@
 **Enable the UART Bootstrap mode by removing the Mode jumper.\\
-Send '[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z280rc:loadngo.zip|loadngo.run]] ' as binary file: ← Please note: it may be necessary to add 1ms transmission delay to every line**
+Send '[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:z280rc:loadngo.zip|loadngo.run]] ' as binary file: ← Please note: it may be necessary to add 1ms transmission delay to every line**
 //……………………………………………………………………………………………………………………………………………UX\\
@@ Line 49: / Line 49: @@
 ==== Install CP/M2.2 ====
-**Load [[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:tinyz280:cpm22all_hex_loadfile.zip|cpm22all.hex]] before issuing 'c2' command.**
+**Load [[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:tinyz280:cpm22all_hex_loadfile.zip|cpm22all.hex]] before issuing 'c2' command.**
 //TinyZZ Monitor v0.99 6/9/18//
@@ Line 65: / Line 65: @@
 ==== Install CP/M 3 ====
-**Load [[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:tinyz280:cpmldr_hex.zip|cpmldr.hex]] before issuing 'c3' command.**
+**Load [[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:tinyz280:cpmldr_hex.zip|cpmldr.hex]] before issuing 'c3' command.**
 //>…………………………………………………………………………………………………………X//
@@ Line 109: / Line 109: @@
 E – RAM drive:// **D** //press Return to execute command//
-**load [[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:tinyz280:cpm22dri.zip|cpm22dri.hex]], this is the cpm22 distribution files.**
+**load [[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:tinyz280:cpm22dri.zip|cpm22dri.hex]], this is the cpm22 distribution files.**
 //>E………………………………………………………………//**long response, truncated**//……………………………………………..X//
@@ Line 155: / Line 155: @@
 ==== Install CP/M 3 distribution files ====
-**Load the CPM3 distribution files, [[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:tinyz280:cpm3dstr.zip|CPM3DSTR.HEX]]\\
+**Load the CPM3 distribution files, [[https://retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:tinyz280:cpm3dstr.zip|CPM3DSTR.HEX]]\\
 It is a big file, taking 2 minutes and 20 seconds to load at 115200 buad.**