Differences

This shows you the differences between two versions of the page.

--- builderpages:plasmo:simple80 [2023/09/23 17:30] – Revision from 2023-09-23
+++ builderpages:plasmo:simple80 [2026/06/15 13:11] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 /* Imported from Wayback Machine
-   Original URL : https://www.retrobrewcomputers.org/doku.php?id=builderpages:plasmo:simple80
+   Original URL : https://www.retrobrewcomputers.org/doku.php?id=builderpages%3Aplasmo%3Asimple80
-   Snapshot date: 2023-09-23
+   Snapshot date: 2026-04-06
    Generator    : wayback-archiver
 */
@@ Line 55: / Line 55: @@
 ==== Software ====
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:simple80:simple80_monitor_v0_81.zip|Simple80 Monitor rev 0.81]], ←(updated 6/1/23) a basic monitor for Simple80. Use this monitor to initialize CF disk and load CP/M2.2 and CP/M3. This monitor will work with both rev0 and rev1 PC board of Simple80 with or without R16 engineering change. .
+[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:simple80:simple80mon_v0_92_improved_hitechc.zip|Simple80 Monitor rev 0.92]], ←(updated 11/21/23) a basic monitor for Simple80. Use this monitor to initialize CF disk and load CP/M2.2 and CP/M3. This monitor will work with both rev0 and rev1 PC board of Simple80 with or without R16 engineering change. Rev0.91 supports [[https://github.com/Laci1953/HiTech-C-compiler-enhanced|Ladislau's improved HiTech C compiler]] and TE editor.
 [[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:plasmo:simple80:loadable_scmonitor_startrek.hex|SCMonitor for Simple80]]. This is Steve Cousin's SCMonitor ported to Simple80. Startrek program is included in this port. To run Startrek, type 'wbasic' followed by 'run'. Please note this program is not to be burned into the boot flash; it is to be loaded into memory using Simple80 monitor followed by 'g0' monitor command to invoke SCMonitor.