| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| builderpages:jonas_edin:start [2019/11/14 22:54] – Revision from 2019-11-14 | builderpages:jonas_edin:start [2026/06/15 13:01] (current) – external edit 127.0.0.1 |
|---|
| /* Imported from Wayback Machine | /* Imported from Wayback Machine |
| Original URL : https://retrobrewcomputers.org/doku.php?id=builderpages:jonas_edin:start | Original URL : https://retrobrewcomputers.org/doku.php?id=builderpages:jonas_edin:start |
| Snapshot date: 2019-11-14 | Snapshot date: 2020-09-26 |
| Generator : wayback-archiver | Generator : wayback-archiver |
| */ | */ |
| ^Projects ^Current Status ^Comments ^ | ^Projects ^Current Status ^Comments ^ |
| |**Processor boards** | | | | |**Processor boards** | | | |
| |SBC V2 |Running |Running with no problems at 20 Mhz with Prop I/O or PPISD. Built with ALS and F-logic. Up to (at least) 12 MHz with DiskIO v3, Dual IDE and Dual SD. My first build at N8VEM. | | |SBC V2 |Running |Running with no problems at 20 Mhz with Prop I/O, PPIDE or PPISD. Built with ALS and F-logic. Up to (at least) 12 MHz with DiskIO v3, Dual IDE and Dual SD. My first build at N8VEM. | |
| |Z180 Mark IV |Running |Built with LS-logic only. Z8S180-33 with 18.432 MHz oscillator (x2), RomWBW 2.7.1 and UNA. I love this board. Thank you John! | | |Z180 Mark IV |Running |Built with LS-logic only. Z8S180-33 with 18.432 MHz oscillator (x2), RomWBW and UNA. I love this board. Thank you John! | |
| |6x0x-ATX-6U |Assembled |68B09, Flex9, not tested | | |6x0x-ATX-6U |Assembled |68B09, Flex9, not tested | |
| |6x0x-ATX-6U |Assembled |6502, DOS/65, not tested | | |6x0x-ATX-6U |Assembled |6502, DOS/65, not tested | |
| |Mini-68k |Running |Running at 10 MHz with MC68008FN10. LS-logic only. Tested with MF-PIC, Disk I/O V3 and Dual IDE. Excellent board! | | |Mini-68k |Running |Running at 10 MHz with MC68008FN10. LS-logic only. Tested with MF-PIC, Disk I/O V3 and Dual IDE. Excellent board! | |
| |Kiss-68030 |Running |Running at 25 MHz. CP/M-68k and Will's Linux distro. Excellent board! A piece of magic.\\ \\ I had problems programming the GALs (Lattice GAL22V10C or GAL22V10D) with my MiniPro TL866. Solved with yet another programmer - a Genius G540. I quote: //The Genius G540 programmer is a case of good hardware let down by its software.// An effort to improve the English can be found here (not tested yet): http://www.edaboard.com/thread313237.html\\ Updated USB-drivers for Genius G540 can be found here: https://www.silabs.com/products/interface/Pages/direct-access-drivers.aspx | | |Kiss-68030 |Running |\\ Running at 25 MHz. CP/M-68k and Will's Linux distro. Excellent board! A piece of magic.\\ \\ I had problems programming the GALs (Lattice GAL22V10C or GAL22V10D) with my MiniPro TL866. Solved with yet another programmer - a Genius G540. I quote: //The Genius G540 programmer is a case of good hardware let down by its software.// An effort to improve the English can be found here (not tested yet): http://www.edaboard.com/thread313237.html\\ Updated USB-drivers for Genius G540 can be found here: [[https://www.silabs.com/products/interface/Pages/direct-access-drivers.aspx|https:%%//%%www.silabs.com]] | |
| |SBC6120-RBC Edition |Running |Thank you Andrew for all the hard work preparing boards and kits! Assembled and ready one day after arrival. Beautiful. Running at 8 MHz without any issues. Playing Adventure. | | |SBC6120-RBC Edition |Running |Thank you Andrew for all the hard work preparing boards and kits! Assembled and ready one day after arrival. Beautiful. Running at 8 MHz without any issues. Playing Adventure. | |
| |Reh CPU280 |Running |Thank you Lamar for reviving Tilmann Reh's fascinating (although a bit frustrating) board. Tested with CPM Plus maintained by Wayne Warthen. Excellent work Wayne! https://github.com/wwarthen/CPU280\\ With a simple adapter I can use up to four 3.5“ and/or 5.25” FDs. | | |Reh CPU280 |Running |Thank you Lamar for reviving Tilmann Reh's fascinating (although a bit frustrating) board. Tested with CPM Plus maintained by Wayne Warthen. Excellent work Wayne! https://github.com/wwarthen/CPU280\\ With a simple adapter I can use up to four 3.5“ and/or 5.25” FDs. | |
| |SBC-188 |Running |Tested with Dual IDE and PPIDE at 16 MHz. MS-DOS 6.22. Why not CPM-86? Yet another gem from John. | | |SBC-188 |Running |Running at 25 MHz as a SBC with PPIDE. Tested with Dual IDE at 16 MHz. MS-DOS 6.22. Why not CPM-86? Yet another gem from John. | |
| |MiniMax 8085 |Running |I have built quite a few… Simple, elegant, capable and possible to expand. | | |MiniMax 8085 |Running |I have built quite a few… with 8 MHz Tundra 80C85. Simple, elegant, capable and possible to expand. | |
| |Zeta 2 |Running |Running at 20 MHz with ParPortProp. Excellent boards! A complete and very capable CP/M-system. Thank you Sergey! | | |Zeta 2 |Running |Running at 20 MHz with ParPortProp. Excellent boards! A complete and very capable CP/M-system. Thank you Sergey! | |
| |**I/O Boards** | | | | |**I/O Boards** | | | |
| |Disk I/O V3 |Running |Built with LS logic only. Tested with Mini-68k at 10 MHz and SBC V2 at 8, 10 and 12 MHz. | | |Disk I/O V3 |Running |Built with LS logic only. Tested with Mini-68k at 10 MHz and SBC V2 at 8, 10 and 12 MHz. | |
| |Dual IDE with FDC |Running |Built two with LS-logic. Tested with Mini-68k at 10 MHz, SBC V2 at 8, 10 and 12 MHz and SBC-188 at 16 MHz. | | |Dual IDE with FDC |Running |Built two with LS-logic. Tested with Mini-68k at 10 MHz, SBC V2 at 8, 10 and 12 MHz and SBC-188 at 16 MHz. | |
| |Dual SD |Running |Built with LS-logic. Tested with SBC V2 at 8, 10,12, 16 and 20 MHz. Intermittent errors with old/slow SD-cards. Less problems with RomWBW 2.5.5 compared to 2.7.1 | | |Dual SD |Running |Built with LS-logic. Tested with SBC V2 at 8, 10,12, 16 and 20 MHz. Intermittent errors with old/slow SD-cards. | |
| |Multifunction-PIC |Running |Built two with LS-logic. One for Mini-68k and one for Kiss-68030. | | |Multifunction-PIC |Running |Built two with LS-logic. One for Mini-68k and one for Kiss-68030. | |
| |Prop I/O V2 |Running |Running with SBC V2 at 20 Mhz. Built with ALS logic except U3 (74LS682) and U7 (74F06). | | |Prop I/O V2 |Running |Running with SBC V2 at 20 Mhz. Built with ALS logic except U3 (74LS682) and U7 (74F06). | |
| |Reh IDE |Assembled |Built two, not tested yet. | | |Reh IDE |Assembled |Built two, not tested yet. | |
| |SCSI2IDE |Assembling |Waiting for Z53C80 (or Am53C80) … arrived! | | |SCSI2IDE |Running… |The card is alive, but I have problems connecting to SCSI-adapter. | |
| |VDU |Assembled |Not tested yet | | |VDU |Assembled |Not tested yet | |
| |VGA3 |Assembled |Not tested yet | | |VGA3 |Assembled |Not tested yet | |
| |ParPortProp |Running |With Zeta 2 at 20 MHz | | |ParPortProp |Running |With Zeta 2 at 20 MHz | |
| |**Mini boards** | | | | |**Mini boards** | | | |
| |PPISD |Running |Tested with SBC V2 at 20 MHz (with PPI CP82C55A or TMP82C55AP-10). Problems with old Lexar SD-cards but no problems at all with new 8 GB SDHC SanDisk cards. | | |PPISD |Running |Tested with SBC V2 at 20 MHz (using PPI CP82C55A or TMP82C55AP-10). Problems with old Lexar SD-cards but no problems at all with new 8 GB SDHC SanDisk cards. | |
| |PPIDE |Running |Tested with SBC V2 at 20 MHz and SBC-188 at 16 MHz. | | |PPIDE |Running |Tested with SBC V2 at 20 MHz and SBC-188 at 25 MHz. | |
| |**Planned** | | | | |**Planned** | | | |
| |Am9511 for MiniMax8085 |Not yet |HW implementation seemingly easy but SW more of a challenge. | | |Am9511 for MiniMax8085 |Not yet |HW implementation seemingly easy but SW more of a challenge. | |
| |**ISA boards\\ Sergey's 8088** | | | | |**ISA boards\\ Sergey's 8088** | | | |
| |Xi 8088 |Running |Running at last! I have experienced some stability problems. Active termination? Maybe something like this:\\ http://www.smbaker.com/diagnosing-xi-8088-stability-issues | | |Xi 8088 |Running |Running at last! I have experienced some stability problems. Active termination? Maybe something like this:\\ http://www.smbaker.com/diagnosing-xi-8088-stability-issues | |
| |Micro 8088 |Assembled | | | |Micro 8088 |Running |\\ A compact and stable system at 9.55 MHz with NEC V20, i8087, Sergey's SVGA, Floppy Disk and Serial Controller and XT-CF Lite. I have tested a lot of DOS and Windows software, including AutoCAD, Windows 3.0, Windows286/2.11, Word Perfect, Word, Works, Excel, Lotus 123, Quattro Pro, Paradox, FoxPro, Aldus Pagemaker, CorelDraw, et cetera, et cetera.\\ \\ A lot of so called abandonware can be found here: http://winworldpc.org\\ \\ I am using USE!UMBS.SYS and DosMax. Only 10 kB below 640 kB after booting MS-DOS 6.22!\\ I must build an EMS-board or two.\\ \\ https://www.lo-tech.co.uk/wiki/Lo-tech_2MB_EMS_Board | |
| |ISA Backplane |Running |Alive | | |ISA Backplane |Running |Alive | |
| |ISA SVGA PCB |Running |Tested in Xi 8088 and in my 286. I have built two of them. The TVGA9000i is a 160-pin millipede, but surface mount is easy with some practice, a good soldering iron, flux and reading glasses. Just solder it! Listening to (or reading) some good advice is recommended. | | |ISA SVGA PCB |Running |Tested in Xi 8088, Micro 8088 and my 286. I have built two of them. The TVGA9000i is a 160-pin millipede, but surface mount is easy with some practice, a good soldering iron, flux and reading glasses. Just solder it! Listening to (or reading) some good advice is recommended. | |
| |ISA OPL2 |Running |Tested with Castle Wolfenstein (286+). I hear music! | | |ISA OPL2 |Running |Tested with Castle Wolfenstein (286+). I hear music! | |
| |ISA Floppy Disk and Serial Controller PCB |Running |Tested in Xi 8088. | | |ISA Floppy Disk and Serial Controller PCB |Running |Tested in Xi 8088 and Micro 8088 | |
| |ISA XT-CF-Lite |Assembled |Alive | | |ISA XT-CF-Lite |Running |With Micro 8088 | |
| |ISA XT-IDE V2, x2 |Assembled |Alive | | |ISA XT-IDE V2, x2 |Assembled | | |
| |ISA XT-IDE V4 |Assembling | | | |ISA XT-IDE V4 |Assembled | | |
| | | | | | | | | | |
| |**VT100** | | | | |**VT100** | | | |
| |**PIC32 computer** | | | | |**PIC32 computer** | | | |
| |Geoff Graham's Colour Maximite |Running |A very capable, single-chip BASIC computer, based upon the PIC32MX795 and with Graham's MMBasic. The PIC32 is a 100-pin 14×14 mm component. Quite easy to solder (or at least within reason for a beginner) if you listen to or read some good advise!\\ \\ I have built four Colour Maximites. One with MMBasic, one with RetroBSD, one with something else(?) and one just for fun (or for give away). I got overconfident when I built the fourth computer. I dropped the PIC, picked it up and soldered it 90 degrees wrong. All one hundred pins were firmly soldered to the board. I de-soldered the chip using a glass ceramic hotplate at moderate heat. I could lift the chip from the board after a few seconds. Chip and board where not damaged.\\ \\ http://geoffg.net/maximite.html\\ http://mmbasic.com/\\ Or why not try BSD UNIX (RetroBSD)? http://retrobsd.org| | |Geoff Graham's Colour Maximite |Running |A very capable, single-chip BASIC computer, based upon the PIC32MX795 and with Graham's MMBasic. The PIC32 is a 100-pin 14×14 mm component. Quite easy to solder (or at least within reason for a beginner) if you listen to or read some good advise!\\ \\ I have built four Colour Maximites. One with MMBasic, one with RetroBSD, one with something else(?) and one just for fun (or for give away). I got overconfident when I built the fourth computer. I dropped the PIC, picked it up and soldered it 90 degrees wrong. All one hundred pins were firmly soldered to the board. I de-soldered the chip using a glass ceramic hotplate at moderate heat. I could lift the chip from the board after a few seconds. Chip and board where not damaged.\\ \\ http://geoffg.net/maximite.html\\ http://mmbasic.com/\\ Or why not try BSD UNIX (RetroBSD)? http://retrobsd.org| |
| |**Sharp MZ-series** |MZ-80B, MZ-700, MZ-800|To be continued… | | |**Sharp MZ-series** |MZ-80B, MZ-700, MZ-800|\\ To be continued…\\ \\ https://www.sharpmz.no/ | |
| |FDC board |Some progress | | | |FDC board |Some progress | | |
| |RS232 board |Running |For Sharp MZ-800 and MZ-80B. | | |RS232 board |Running |For Sharp MZ-800 and MZ-80B. | |
