Differences

This shows you the differences between two versions of the page.

--- builderpages:floobydust:start [2022/01/27 14:34] – Revision from 2022-01-27
+++ builderpages:floobydust:start [2026/06/15 12:59] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+/* Imported from Wayback Machine
+   Original URL : https://retrobrewcomputers.org/doku.php?id=builderpages:floobydust:start
+   Snapshot date: 2025-11-17
+   Generator    : wayback-archiver
+*/
+I have a long time interest in the 6502 processor, but when the CMOS version was released (in the 80's), I immediately switched over to it. I've done multiple hardware projects around the 65C02 over the decades and have recently started doing some newer projects.
+I now have a C02 Pocket SBC which is based on the WDC 65C02 processor running at 6MHz. Configuration is quite simple with 32KB static RAM, 32KB EEPROM, a NXP/Philips SCC2691 UART, ATF22V10 glue logic and a FTDI Async to USB interface. It, along with some other projects, can be found on my Github page.
+I only write in assembler for the W65C02 and have written a stable and good performing BIOS and Monitor. I've also modified Lee Davison's Enhanced Basic with multiple CMOS instructions/addressing modes and some other changes. For these projects, I publish the schematics, PCB layout (both in ExpressPCB), full source code for use with WDC Tools and the CPLD code for the glue logic in WinCUPL.
+I'll be adding these and newer projects in the near future. The C02 Pocket SBC and all of it's information can be found at: https://github.com/floobydust
+Regards, KM