| |
| boards:sbc:n8:n8 [2023/12/27 00:57] – Revision from 2023-12-27 | boards:sbc:n8:n8 [2026/06/15 12:34] (current) – external edit 127.0.0.1 |
|---|
| /* Imported from Wayback Machine | /* Imported from Wayback Machine |
| Original URL : https://retrobrewcomputers.org/doku.php?id=boards%3Asbc%3An8%3An8 | Original URL : https://www.retrobrewcomputers.org/doku.php?id=boards%3Asbc%3An8%3An8 |
| Snapshot date: 2023-12-27 | Snapshot date: 2026-04-06 |
| Generator : wayback-archiver | Generator : wayback-archiver |
| */ | */ |
| Successful serial communication with the ZS180 requires the DCD to be low. On the N8 board DCD is pin 47 of the ZS180. This line is tied to ground via resistor R42 (2K2). This resistor value may be too high. If you are unable to see serial output then try bridging this resistor so pin 47 is connected to ground. | Successful serial communication with the ZS180 requires the DCD to be low. On the N8 board DCD is pin 47 of the ZS180. This line is tied to ground via resistor R42 (2K2). This resistor value may be too high. If you are unable to see serial output then try bridging this resistor so pin 47 is connected to ground. |
| |
| |[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:n8-2511_-_jumper_settings.pdf|N8-2511 Jumper Settings]] |Listing of the various Jumper Settings | | |[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:n8-2511_-_jumper_settings.pdf|N8-2511 Jumper Settings]] |Listing of the various Jumper Settings | |
| |[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:n8-2511_bom.pdf|N8-2511 BOM]] |BOM for release 2511 | | |[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:n8-2511_bom.pdf|N8-2511 BOM]] |BOM for release 2511 | |
| |[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:printing_n8-2511-sch-12.pdf|N8-2511 Schematc]] |Schematic | | |[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:printing_n8-2511-sch-12.pdf|N8-2511 Schematc]] |Schematic | |
| |[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:printing_n8-2511-brd-06.pdf|N8-2511 Board]] |board | | |[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:printing_n8-2511-brd-06.pdf|N8-2511 Board]] |board | |
| |[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:hc-2312-sch-13.pdf|N8-2312 Schematic]] |Schematic 2312 version | | |[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:hc-2312-sch-13.pdf|N8-2312 Schematic]] |Schematic 2312 version | |
| |[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:hc-2312-brd-07.pdf|N8-2312 Board]] |Board 2312 version | | |[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:hc-2312-brd-07.pdf|N8-2312 Board]] |Board 2312 version | |
| |[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:ecb_hc3-n8-4314.zip|N8-4314 Board and Schematic]] |ZIP Archive with build files for the 4314 version | | |[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:ecb_hc3-n8-4314.zip|N8-4314 Board and Schematic]] |ZIP Archive with build files for the 4314 version | |
| |[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:n8-ddw-msxbios_9_9_2017.zip|MSX BIOS]] |MSX BIOS Software (SD card now works with all versions of board, ROM is compiled for 2312 or newer)| | |[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:n8-ddw-msxbios_9_9_2017.zip|MSX BIOS]] |MSX BIOS Software (SD card now works with all versions of board, ROM is compiled for 2312 or newer)| |
| |[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:ymplayer01_2012-07-19.zip|YMPlayer]] |YPlayer software | | |[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:ymplayer01_2012-07-19.zip|YMPlayer]] |YPlayer software | |
| |[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:aytest1.zip|AVTest]] |AVTest Software | | |[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:aytest1.zip|AVTest]] |AVTest Software | |
| |[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:n8_case_construction.zip|N8 Laser Cut Acrylic Case Design]]|N8 laser cut acrylic case SVG files and assembly pictures | | |[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:sbc:n8:n8_case_construction.zip|N8 Laser Cut Acrylic Case Design]]|N8 laser cut acrylic case SVG files and assembly pictures | |
| |
| \\ | \\ |
| |
