Differences

This shows you the differences between two versions of the page.

--- boards:s100:compupro_system_support_reproduction:start [2025/02/12 21:22] – Revision from 2025-02-12
+++ boards:s100:compupro_system_support_reproduction:start [2026/06/15 12:52] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+/* Imported from Wayback Machine
+   Original URL : https://retrobrewcomputers.org/doku.php?id=boards:s100:compupro_system_support_reproduction:start
+   Snapshot date: 2023-01-30
+   Generator    : wayback-archiver
+*/
+==== CompuPro System Support revB2 Reproduction by Rich Camarda ====
+Rich Camarda has created a reproduction of the Cromemco System Support described at http://www.s100computers.com/Hardware%20Folder/CompuPro/System%20Support%201/System%20Support%201.htm
+Rich has said that:
+<blockquote>
+Not a show stopper, but one of the builders found a minor issue that I can correct. If not the board is fine, I would just need to note to builders that the 7912 regulator would need an insulator and nylon screw, or mounted so it does not touch the bare ground plane underneath.
+</blockquote>
+and
+<blockquote>
+I don't have part numbers for the nylon, screw, washer, and nut, but almost any will work fine. The one I used is an M3 size, but I am sure a 6-32, or 4-40 would work just fine.
+</blockquote>
+{{boards:s100:cromemco_system_support_reproduction:ss1-7912-1.jpg?600}} {{boards:s100:cromemco_system_support_reproduction:ss1-7912-2.jpg?600}}
+The manual from s100computers.com is here: [[https://retrobrewcomputers.org/lib/exe/fetch.php?media=boards:s100:cromemco_system_support_reproduction:compupro_system_support_1_manual.pdf|compupro_system_support_1_manual.pdf]]