Differences

This shows you the differences between two versions of the page.

--- boards:other:ppide [2025/02/09 04:40] – Revision from 2025-02-09
+++ boards:other:ppide [2026/06/15 12:27] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+/* Imported from Wayback Machine
+   Original URL : https://www.retrobrewcomputers.org/doku.php?id=boards:other:ppide
+   Snapshot date: 2025-09-07
+   Generator    : wayback-archiver
+*/
+====== PPIDE ======
+The PPIDE board is an interface board designed to connect IDE devices such as hard drives and Compact Flash cards to a computer through the parallel expansion connector..
+===== Features =====
+Compatible with SBC V2, SBC-188 and Zeta computers.
+Does not require an ECB backplane to operate.
+Software support in ROMWBW and CP/M.
+===== Pictures =====
+{{[[lib:plugins:ckgedit:fckeditor:userfiles:image:boards:other:ppide:mini_ppide.jpg]]
+[[boards:other:ppide:gallery|Gallery]]
+===== Current Version =====
+The current [[https://n8vem.narkive.com/S6iu5dyr/n8vem-18636-mini-ppide-boards-new-layout-sbc-188-sbcv2|version]] was designed by [[https://thezippsterzone.com/about-me/|Ed Snider]] and incorporate layout changes for mounting within the base board footprint without blocking access to adjacent connectors.
+===== Acknowledgements =====
+Max Scane developed the original design and pcb board with software support provided by David Giles and Wayne Warthen.
+====== Hardware Documentation ======
+===== Board =====
+[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:other:ppide:ppidegerbers.zip|:boards:other:ppide:ppidegerbers.zip]]
+https://oshpark.com/shared_projects/is8CiGZf
+===== Schematics =====
+[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:other:ppide:ppide-schematic.pdf|:boards:other:ppide:ppide-schematic.pdf]]
+===== Parts =====
+^Desg^Part                            ^Qty^
+|    |74LS14                          |1  |
+|    |14-pin DIP narrow socket        |1  |
+|    |26-pin header (13×2)            |1  |
+|    |0.1uf (100 nF) Ceramic Capacitor|1  |
+|    |40-pin right angle header (20×2)|1  |
+|    |LED                             |1  |
+|    |470R Resistor                   |1  |
+|    |4-pin power connector           |1  |
+|JP2 |2-pin header                    |1  |
+|KP1 |1x 3-pin header                 |1  |
+Substitute male IDC headers if remote mounting with flying leads is desired.
+\\
+====== Resources ======
+Legacy archive: [[n8vem-pbwiki-archive:0:35845334:35845372:35846055:index|[[n8vem-pbwiki-archive:0:35845334:35845372:35846055:index.htm]]]]