Differences

This shows you the differences between two versions of the page.

--- boards:ecb:zilog-peripherals:start [2025/01/13 01:31] – Revision from 2025-01-13
+++ boards:ecb:zilog-peripherals:start [2026/06/15 12:24] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 /* Imported from Wayback Machine
-   Original URL : https://www.retrobrewcomputers.org/doku.php?id=boards:ecb:zilog-peripherals:start
+   Original URL : https://retrobrewcomputers.org/doku.php?id=boards:ecb:zilog-peripherals:start
-   Snapshot date: 2025-01-13
+   Snapshot date: 2025-04-28
    Generator    : wayback-archiver
 */
@@ Line 45: / Line 45: @@
 ==== Schematics ====
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:ecb:zilog-peripherals:v2:zilog_peripherals-schematics-2.0_002.pdf|:boards:ecb:zilog-peripherals:v2:zilog_peripherals-schematics-2.0_002.pdf]]
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=boards:ecb:zilog-peripherals:v2:zilog_peripherals-schematics-2.0_002.pdf|:boards:ecb:zilog-peripherals:v2:zilog_peripherals-schematics-2.0_002.pdf]]
 ==== Board Layout ====
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:ecb:zilog-peripherals:v2:zilog_peripherals-board-2.0_002.pdf|:boards:ecb:zilog-peripherals:v2:zilog_peripherals-board-2.0_002.pdf]]
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=boards:ecb:zilog-peripherals:v2:zilog_peripherals-board-2.0_002.pdf|:boards:ecb:zilog-peripherals:v2:zilog_peripherals-board-2.0_002.pdf]]
 ==== KiCad Files ====
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:ecb:zilog-peripherals:v2:zilog_peripherals-kicad-2.0_002.zip|:boards:ecb:zilog-peripherals:v2:zilog_peripherals-kicad-2.0_002.zip]]
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=boards:ecb:zilog-peripherals:v2:zilog_peripherals-kicad-2.0_002.zip|:boards:ecb:zilog-peripherals:v2:zilog_peripherals-kicad-2.0_002.zip]]
 ==== PCB Gerber files ====
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:ecb:zilog-peripherals:v2:zilog_peripherals-gerbers-2.0_002.zip|:boards:ecb:zilog-peripherals:v2:zilog_peripherals-gerbers-2.0_002.zip]]
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=boards:ecb:zilog-peripherals:v2:zilog_peripherals-gerbers-2.0_002.zip|:boards:ecb:zilog-peripherals:v2:zilog_peripherals-gerbers-2.0_002.zip]]
 ==== PCB Parts List ====
-[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:ecb:zilog-peripherals:v2:zilog_peripherals-partlist-2.002.txt|:boards:ecb:zilog-peripherals:v2:zilog_peripherals-partlist-2.002.txt]]
+[[https://retrobrewcomputers.org/lib/exe/fetch.php?media=boards:ecb:zilog-peripherals:v2:zilog_peripherals-partlist-2.002.txt|:boards:ecb:zilog-peripherals:v2:zilog_peripherals-partlist-2.002.txt]]
 ==== Connectors ====
@@ Line 310: / Line 310: @@
 After reset the Z80-PIOs will have their ports set to mode 1 (all inputs). Using the monitor to read the four ports at 0xB8, 0xB9, 0xBC and 0xBD (i.e.I B8) will read the values on the pins. With nothing connected to headers X1 and X2 my Z80-PIOs read all zeros. A clip lead from the 5 to any I/O pin will show up as a different value when the port is read.
-A simple register test program is available (base address 0xB0): [[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=boards:ecb:zilog-peripherals:2piotst.zip|:boards:ecb:zilog-peripherals:2piotst.zip]]
+A simple register test program is available (base address 0xB0): [[https://retrobrewcomputers.org/lib/exe/fetch.php?media=boards:ecb:zilog-peripherals:2piotst.zip|:boards:ecb:zilog-peripherals:2piotst.zip]]
 \\