Differences

This shows you the differences between two versions of the page.

--- boards:ecb:backplane-505-6508:partslist [2019/10/18 00:17] – Revision from 2019-10-18
+++ boards:ecb:backplane-505-6508:partslist [2026/06/15 12:13] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+/* Imported from Wayback Machine
+   Original URL : https://retrobrewcomputers.org/doku.php?id=boards:ecb:backplane-505-6508:partslist
+   Snapshot date: 2025-06-14
+   Generator    : wayback-archiver
+*/
+====== Parts List ======
+<code file>
+eeschema (2011-07-12 BZR 3047)-stable  >> Creation date: Wed 15 Apr 2014
+*   = with 505-6508 chassis; 100K grounding resistor used
+**  = use with external +5v switching power supply
+@@  = install for Kontron compatible Reset operation:
+DIN
+-pin  N8VEM legacy            Kontron compatible
+C-31    output from CPU         input to CPU board
+        peripheral reset
+C-26    not used                output from CPU board
+                            peripheral reset
+If you are not sure, use N8VEM legacy; i.e., don't stuff the switch or 2-pin connector.
+#Cmp ( order = Reference )
+   | BAT1       SN2032 socket   optional 3v Lithium battery socket
+   | C1-22      0.1 uF      monolithic or ceramic
+   | C23        22uF        electrolytic (22uF up to 100uF)
+   | C26        0.1uF to  0.47uF monolithic or ceramic
+   | D1         LED         Green (VCC)
+   | D2         LED         Red (+5v)
+   | D6         LED         Yellow (+12v)
+   | JP1        CONN_3      backplane battery power source selection
+** | P2         POWER       Molex 4-pin IBM peripheral connector
+   | P50        CONN_2      external battery connector
+@@ | P81        RESET       external Reset connector (Kontron)
+   | R1         470 ohm 1/4 W
+   | R2         330 ohm 1/4 W
+   | R3         1000 ohm 1/4 W -- up to 4.7K, if yellow is too bright for you
+*  | R4         100K        use with Siemens 505-6508 chassis
+*  | SW1        POWER       use #18 copper wire short circuit if Siemens chassis to be used
+@@ | SW2        SW_PUSH     Kontron reset only
+   | U0-11      C96ABC      96-pin female DIN 41612 connector
+#End Cmp
+The LED colors are suggested:  Yellow corresponds to the +12v yellow wire on the IBM power connector, Red to the +5 wire, and Green for GO: "Vcc Power On" the backplane connectors.
+#End List
+</code>